大理市生活垃圾焚烧处置初探

针对大理生活垃圾污染现状,提出采用高温焚烧方法处理大理市产生的城市生活垃圾的必要性,并用垃圾焚烧产生的热能发电.采取相应的措施防治燃烧过程中产生的污染物,可最终实现垃圾处理的减量化、无害化、资源化要求.     

金鱼藻对Cu2+的生物吸附特征

研究了沉水植物金鱼藻对Cu2 的吸附动力学及热力学特征.结果表明,金鱼藻对Cu2 的吸附在20min内达到平衡,吸附动力学的实验结果符合伪二级动力学方程,其相关系数达到0.9937,表明该吸附为多种反应同时作用的复杂过程.用Langmuir和Freundlich2种吸附等温式拟合吸附热力学的实验结果表明,以Langmuir模型拟合效果更好,相关系数为0.9977,其最大吸附量为7.79mg/g.在解吸实验中,各浓度组的解吸率均在1%以下,表明金鱼藻对Cu2 的吸持作用较强.     

Characteristics of phosphorus chemistry and its geographical distribution in the Haihe River valley,North China

ＣｈａｒａｃｔｅｒｉｓｔｉｃｓｏｆｐｈｏｓｐｈｏｒｕｓｃｈｅｍｉｓｔｒｙａｎｄｉｔｓｇｅｏｇｒａｐｈｉｃａｌｄｉｓｔｒｉｂｕｔｉｏｎｉｎｔｈｅＨａｉｈｅＲｉｖｅｒｖａｌｌｅｙ，ＮｏｒｔｈＣｈｉｎａＪｉａｎｇＧａｏｍｉｎｇ；ＨｕａｎｇＹｉｎｘｉａｏ；Ｌ...     

重型柴油车污染物排放量计算方法比较分析

目的 计算大功率大吨位级重型柴油车的污染物排放量.方法 根据《公路隧道通风设计细则》和世界道路协会(PIARC)2012年技术报告,分别计算32 t重型柴油车的污染物排放量和稀释污染物所需的通风量,对比分析两种计算方法的差异.结果 对《公路隧道通风设计细则》中柴油车的车型系数和海拔高度系数提出建议.根据世界道路协会(PIARC)2012年技术报告,在0～2000 m低海拔地区,国产32 t柴油车的CO、NOx和烟尘排放量分别为88.6、166.0 m3/(h·veh)和84.2 m2/(h·veh),如果考虑NOx的空气污染,稀释单辆国产32 t柴油车排放污染物所需空气量约为33000 m3/h;如果不考虑NOx的空气污染,所需空气量约为28000 m3/h.结论 结合工程实际,建议大功率大吨位级重型柴油车的污染物排放量根据世界道路协会(PIARC)2012年技术报告进行计算.     

Effects of atmospheric gases on terrestrial plants and critical levels of air pollution

An integrated approach was developed to determine the critical levels of air pollution for ecological standard setting based on the unified index of biological response, by taking into account the effects of all pollution components simultaneously. An empirical model of plant productivity was taken as the dose response model for gaseous pollutant effect on the productivity of trees and the annual productivity of plants was used as the above mentioned index. The CO2 increase in the lower atmosphere was considered to potentially increase plant productivity and NO2 was estimated as neutral while being dangerous for plants as a chemical precursor of ozone or as a source of acidification. The maximum permissible chronic O3 and SO2 levels for trees were estimated and it was found that O3 is much more phytotoxic, as compared to SO2 , with a rather narrow range of permissible levels (27-33 ppb) which complicates its monitoring and control.     

火电厂浮升烟流穿透模型分析

通过对现有浮升烟流穿透模型的分析,考虑了非均匀层结大气对烟流抬升的影响,提出了一个较为合理的穿透模型,区域性火电厂实例计算结果表明它是有效的.因此,该模型为大型火电厂环境影响评价提供了一种估算浮升烟流穿透过程的实用方法.     

一种新型滑动集电材料的研制及性能研究

利用粉末冶金 /挤压的方法制作了一种新型的Cu C滑动集电材料 ,并对该材料的机械物理、摩擦磨损性能进行了检测 ,结果证明该材料具有较高的抗拉强度、适中的表面硬度、较低的电阻率、优良的摩擦磨损性能 ,是一种较为优良的电力机车滑板材料。其性能测试结果和铁道部标准要求相比 ,优于铁道部标准要求。     

次级燃料还原燃烧产物内NOx的动力学特性研究

提出了在燃煤电站锅炉炉膛内添加次级燃料建立ＮＯｘ的还原区，以控制ＮＯｘ的排放，建立了描述ＮＯｘ还原动态过程的数学模型和化学动力学模型，对计算值和实测值作了比较分析。     

Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.     

吉林省的风能潜力(英文)

近两年我国电力突然短缺,已经引起政府的高度重视。由于我国风电发展的紧迫性和风电发展的潜力,特别是国际上正在如火如荼地开发风电的情景,中国- 奥地利政府间双边合作计划将风电评估列入2001～2003 年度合作计划,论文是该计划的成果之一。以我国吉林省为研究对象,采用广泛使用的风机选址算法和空间分布诊断程序( WAsP和ZAWIMOD2),运用数字地形图和遥感资料获得的土地利用图,进而得到数字化的表面粗糙度,再对吉林省的风能潜力进行估算。完成了近1km² 分辨率的距地面60m高度的风速和风能密度计算,并制作了它们的分布图。这是我国第一次在较大区域上估算距地面60m 高度的风速和风能密度,其方法对我国风电资源的评估有重要的借鉴作用。结果显示最有效的风能资源在吉林省的中西部地区,而南部和东部的高风资源区位于山脊和山顶,对风能的开发有一定的限制。